우리의 Oracle Cloud Infrastructure 2025 Networking Professional 시험 덤프 문제는 최고품질의 시험대비 자료입니다. 전문가들이 최신 실러버스에 따라 몇년간의 노하우와 경험을 충분히 활용하여 연구제작해낸 자료라 해당 시험의 핵심문제를 모두 반영하고 있습니다.1z0-1124-25 덤프로 시험을 준비하시면 시험패스는 더는 어려운 일이 아닙니다. 1z0-1124-25 시험에서 출제 가능성이 높은 문제만 정리한 최신 버전 자료라 가장 적은 문항수로 모든 응시자가 효율적인 시험공부를 할 수 있도록 하고 부담 없이 한번에 1z0-1124-25 시험을 즉시 통과할 수 있도록 도와드립니다.

데모문제 다운로드

간결한 내용

1z0-1124-25 덤프문제는 다년간의 다양한 시험에 대한 분석을 바탕으로, 시험문제의 주요 발전 경향에 따라 응시자가 직면할 어려움을 정면 돌파하기 위하여 전문가들이 자신만의 경험과 끊임없는 노력으로 제작한 최고품질의 시험자료입니다.다른 교육 플랫폼과 달리 Oracle Cloud Infrastructure 2025 Networking Professional 시험덤프는 오래된 문제는 삭제하고 새로운 문제는 바로바로 추가하여 덤프가 항상 가장 최신버전이도록 간결하고 눈에 잘 띄는 텍스트로 요약되어 있기에 덤프만 완벽하게 마스터 하시면 1z0-1124-25 시험패스는 더는 어려운 일이 아닙니다.

커리큘럼 소개

대부분의 분들에게 있어서 자격증 시험이 처음일 수 있으므로 자격증 시험과 관련된 많은 정보는 복잡하고 난해할수 있습니다. 하지만 자격증 취득 초보자들의 덤프공부 후기에 따르면 1z0-1124-25 덤프는 시험의 모든 출제범위와 시험유형을 커버하고 있어 덤프에 있는 문제와 답만 기억하시면 Oracle Cloud Infrastructure 2025 Networking Professional 시험을 쉽게 패스하여 자격증을 취득할수 있다고 합니다. 1z0-1124-25 시험대비 덤프는 초보자의 눈높이에 맞추어 덤프를 사용하시는 분께서 보다 편하게 공부할수 있도록 엘리트한 전문가들의 끊임없는 연구와 자신만의 노하우로 최선을 다한 자료입니다.덤프의 도움으로 여러분은 업계에서 또 한층 업그레이드 될것입니다.

진정한 시뮬레이션 환경

많은 응시자 분들이 처음 자격증 시험에 도전하는 것이라 시험보실 때 경험 부족으로 인해 시험시간에 너무 긴장하여 평소 실력을 발휘하지 못하는 경우가 있습니다.이를 피면할수 있도록 미리 Oracle Cloud Infrastructure 2025 Networking Professional 시험과 비슷한 환경에서 연습하는 훈련을 통해 실제 시험에서 긴장을 완화시키는 것이 좋습니다. 저희는1z0-1124-25 실제 시험 시뮬레이션 테스트 환경에 해당하는 제품을 가지고 있습니다. 제품 구매후 자신의 계정에 로그인하시고 실제 시험 환경을 체험해 보시면 시험 환경에 적응되어 1z0-1124-25 시험보실때 문제 푸는 방법을 모색하는 시간이 줄어들어 자신감이 생겨 한방에 시험패스 가능할것입니다.

최신 Oracle Cloud 1z0-1124-25 무료샘플문제:

1. You have successfully enabled DNSSEC on your OCI DNS zone and provided the DS record to your domain registrar. However, when you test your DNS configuration using online DNSSEC validation tools, you are still seeing errors indicating that DNSSEC validation is failing. What is the most likely reason for this failure?

A) The Time To Live (TTL) value for your DNS records is too low, causing validation errors.
B) The domain registrar has not yet published the DS record in the parent zone, preventing the chain of trust from being established.
C) The DNSSEC algorithm used by OCI DNS is not supported by the validation tools.
D) The OCI DNS resolver is not configured to validate DNSSEC signatures.

2. Your company needs to establish a secure connection between your on-premises network and OCI for a pilot project. The project has a limited budget and requires a quick setup, but also demands that the connection is encrypted. The long-term plan involves migrating to FastConnect, but that will take several months. Which OCI VPN solution would be most suitable for this short-term, budget-conscious, and security-aware scenario?

A) Deploy a third-party virtual appliance VPN solution from the OCI Marketplace within a public subnet and configure a VPN connection to your on-premises network.
B) Use a Dynamic Routing Gateway (DRG) with a Site-to-Site VPN connection configured using static routing.
C) Use a Service Gateway to connect to a third-party VPN service available on the internet.
D) Use a Dynamic Routing Gateway (DRG) with a Site-to-Site VPN connection configured using dynamic routing with BGP.

3. Your company has established a hybrid cloud environment using FastConnect to connect your on-premises network to your OCI VCN. You are advertising on-premises network prefixes to OCI via BGP. You want to ensure that OCI only learns routes from your on-premises network that are within a specific range, and that any other prefixes advertised are rejected to prevent routing conflicts. Which BGP attribute and configuration on the OCI side should you use to achieve this?

A) MED (Multi-Exit Discriminator): Configure MED values on the on-premises BGP router toinfluence OCI's route selection based on preferred exit points.
B) Route Filtering using Prefix Lists: Configure Prefix Lists on the FastConnect virtual circuit to accept only the desired prefix ranges and reject all others.
C) AS Path Prepending: Configure AS Path Prepending on the FastConnect virtual circuit to discourage OCI from selecting routes outside the desired range.
D) Route Filtering using Route Distinguisher (RD) and Route Target (RT): Configure RDs and RTs on the FastConnect virtual circuit to filter routes based on tenant isolation.

4. A large financial institution is migrating its on-premises trading platform to OCI. The platform requires low latency and high bandwidth connectivity to the on-premises data center. You have established an Oracle Cloud Infrastructure FastConnect circuit. You now need to connect multiple VCNs in different regions to the on-premises data center via this FastConnect circuit, optimizing for cost and management overhead. Which DRG configuration would be the most efficient and recommended approach?

A) Create a single DRG in one region and attach all VCNs in all regions to this single DRG using local peering gateways (LPGs). Attach the FastConnect circuit to this single DRG. Configure static routes on the DRG to direct traffic to the appropriate VCNs.
B) Create a single DRG in one region and attach all VCNs in all regions to this single DRG using remote peering connections. Attach the FastConnect circuit to this single DRG. Configure static routes on the DRG to direct traffic to the appropriate VCNs.
C) Create a single DRG in one region. Attach all VCNs in all regions to this single DRG using DRG attachments with remote peering. Attach the FastConnect circuit to the single DRG.
D) Create a separate DRG in each region and attach each VCN to its regional DRG. Then, create a separate FastConnect attachment to each regional DRG. Finally, configure static routes on each DRG to direct traffic appropriately.

5. You are designing a hybrid cloud environment where multiple VCNs in OCI need to communicate with your on-premises network. You are using a single Dynamic Routing Gateway (DRG) to connect to your on- premises network via FastConnect. You want to ensure that each VCN is isolated from the others and that traffic between VCNs must pass through your on-premises security appliances for inspection. How should you configure the DRG attachments and route tables to enforce this security policy?

A) Attach each VCN to the DRG using a Local Peering Gateway (LPG) and then attach one VCN to FastConnect. Configure routes so that traffic traverses from LPG to LPG through the on-premises network.
B) Attach each VCN directly to the FastConnect using IPSec VPN tunnels, bypassing the DRG entirely to ensure all traffic flows through the on-premises security appliances.
C) Attach all VCNs and the FastConnect to the DRG. Configure the DRG route table associated with each VCN attachment to route all traffic destined for other VCNs to the FastConnect attachment. Configure the FastConnect DRG route table to route traffic destined to each VCN to the corresponding VCN attachment.
D) Attach all VCNs and the FastConnect to the DRG. Configure static routes on each VCN's route table pointing to the DRG for any subnet not within the VCN. Enable the "Transit Routing" feature on the DRG to allow inter-VCN communication.

질문과 대답: