최신 1Z0-902 무료덤프 - Oracle Exadata Database Machine X8M Implementation Essentials

A. SNMP traps for alerts are sent by the storage server MS process to the storage server ILOM.

B. SNMP traps for alerts are sent by the storage server RS process to the storage server ILOM.

C. SNMP traps for alerts are sent by the storage server MS process to the Enterprise Manager agent.

D. SNMP traps for alerts are sent by the storage server ILOM to the storage server MS process.

E. SNM? traps for alerts are sent by the storage server ILOM to the Enterprise Manager agent.

F. SNMP traps for alerts are sent by the storage server ILOM to the storage server is process.

G. SNMP traps for alerts are sent by the storage server RS process to the Enterprise Manager agent.

A. hardware monitoring using the storage server ILOM

B. using the CELLCLI CALIBRATE command on the storage server after logging in as the celladmin user

C. using the CELLCLI list LUN DETAIL command as the celladmin user

D. using the CELLCLI CALIBRATE command on the storage server after logging in as the root user

A. Using EXADCLI instead of CELLCLI to create the griddisks

B. File permissions on the griddisks in each storage server

C. Exadata storage realms using ASM-scoped security mode

D. Exadata storage realms using database-scoped security mode

E. File permissions on the griddisks in each database server

A. Do not install Oracle Exadata Rack near a photocopy machine.

B. Do not place anything on top of Oracle Exadata Rack.

C. Do not install Oracle Exadata Rack in a location that is exposed to direct sunlight.

D. When using shared grounding, the grounding resistance must not be greater than 10 ohms.

E. Be sure that each grounding wire used for Oracle Exadata Rack is used exclusively for Oracle Exadata Rack.

F. Do not use a flathead screwdriver to disconnect connector locks on LAN cables.

A. 2x 25Gb ports on eth1 and eth2 using SFP28 transceivers and OM4 fiber cable for backup network, and 2x 10Gb ports on eth3 and eth4 using RJ45 cat6 cable for client network

B. 2x 10Gb ports on eth1 and eth2 using FU45 cat6 cable for client network, and 2x 25Gb ports on eth11 and eth12 using SFP28 transceivers and OM4 fiber cable for backup network

C. 2x 25Gb ports on eth1 and eth2 using SFP28 transceivers and OM4 fibre cable for client network, and 2x 10Gb ports on eth9 and eth10 using RJ45 cat6 cable for backup network

D. 2x 25Gb ports on eth1 and eth2 using SFP28 transceivers and OM4 fiber cable for backup network, and 2x 25Gb ports on eth5 and eth6 using SFP28 transceivers and OM4 fiber cable for client network

A. Add or remove additional databases.

B. OEDACU has Edit mode and Deploy mode.

C. Add or remove Oracle Database home directories.

D. Support ZDLRA life cycle management operation.

E. Add nodes to and remove nodes from a VM cluster.

F. Resize Oracle ASM disk groups.

A. Purchase the recommended x86 64-Bit gateway hardware from Oracle.

B. Install on Exadata Engineered System.

C. Install in Oracle Virtual Machine with required hardware.

D. Provide individual x86 64-Bit gateway hardware.

E. Install on Oracle Database Appliance.

A. You must be physically present in the data center to start an Exadata Storage Server.

B. -> start /SP/console

C. -> start /System

D. -> start /SYS/power

E. -> start /SYSTEM/power

F. -> set /SYS power_state=ON

A. OECA reconfigures the size of disk groups and recreates grid disks.

B. OECA allows one XT storage server in the configuration.

C. OECA extends the hardware for the elastic configuration only.

D. OECA's "Add Equipment" input option allows allocation of RU slots for customer equipment.

E. OECA facilitates PDU power selection initially and after equipment addition.