최신 2V0-642 무료덤프 - VMware Certified Professional 6 - Network Virtualization 6.2

A. An NSX Edge has NOT been deployed into Compute Cluster 1.

B. The Distributed Logical Router was not configured on Compute Cluster 1.

C. The distributed firewall has a default rule set to deny all.

D. Compute Cluster 1 is NOT a member of the Transport Zone.

A. High Availability

B. Default Gateway

C. Firewall Default Policy

D. An interface

A. Configures virtual machine interfaces to which DHCP messages are relayed.

B. Configures Edge interfaces from which DHCP messages are relayed.

C. Configures Edge interfaces to which DHCP messages are relayed.

D. Configures virtual machine interfaces from which DHCP messages are relayed.

A. It supports both Windows and Linux-based virtual machines.

B. It only supports HIPAA and PCI-DSS compliance policies.

C. It only supports Windows-based virtual machines.

D. It supports HIPAA and PCI-DSS compliance policies as well as U.S. Driver License and Social Security numbers.

A. Automatically restart the local router when BGP session is established.

B. Allow packet forwarding to be paused during restart of BGP services.

C. Automatically restart the peer router when BGP session is established.

D. Allow packet forwarding to be uninterrupted during restart of BGP services.

A. Data Plane

B. Management Plane

C. Forwarding Plane

D. Control Plane

A. 80

B. 5480

C. 8443

D. 443

A. Rules can be on either the uplink, internal, or management interfaces.

B. Rules can be applied on the uplink interface only.

C. Rules can be applied on either the uplink interface or internal interface.

D. Rules can be applied on the management and uplink interfaces only.

A. 1. Deploy an NSX manager in Datacenter 2.2. Update the NSX manager role in Datacenter-1 to Primary.3. Update the roles in Datacenter-2 and Datacentar-3 to Secondary.4. Deploy a universal transport zone.

B. 1. Remove the NSX manager from Datacenter-1 and Datacenter-3.2. Reinstall all three NSX managers at the same time.3. Deploy a universal transport zone.4. Deploy a universal distributed logical router.

C. 1. Deploy the NSX manager at Datacenter-2.2. Update the NSX manager role in Datacenter-1 to Primary.3. Deploy a universal transport zone.4. Deploy a universal distributed logical router.

D. 1. Deploy an NSX manager at Dataenter-2.2. Change the roles of the NSX managers in Datacentar-1 and Datacenter-3 to Transit Mode.3. Deploy a universal transport zone.4. Configure the Primary and Secondary roles on all three NSX managers.

A. The active-standby NSX Edge pair will survive one failure. However, the virtual machines must reside on the same host to prevent NSX Edge availability from being compromised.

B. The active-standby NSX Edge HA pair will survive two failures. However, the virtual machines must reside on two different hosts.

C. The active-standby NSX Edge HA pair will survive one failure. However, if another failure happens before the second Edge appliance is restored, NSX Edge availability can be compromised.

D. The active-standby NSX Edge HA pair will survive multiple failures.