최신 CWDP-303 무료덤프 - CWNP Certified Wireless Design Professional

A. Deploy all of the APs as they're shown in the predictive design and perform a passive site survey.

B. Use a client device positioned where the APs will be installed and measure the signal from the client device.

C. Perform an AP-on-a-Stick survey using AP locations based upon the predictive design to confirm each AP's placement.

D. Deploy all of the APs as they're shown in the predictive design and perform an active site survey.

A. Because the FCC requires it.

B. Because the 802.11 standard requires it.

C. Because the AP will experience a buffer overflow if they do not eventually respond with a Probe Response.

D. Because some clients are persistent clients that will not move on to the 5 GHz band.

A. AC_VO

B. AC_BE

C. AC_VI

D. AC_BK

A. All APs share a virtual BSSID. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

B. All APs share a virtual IP address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

C. All APs share a virtual Multicast Address. A controller will tell the closest AP to the client to communicate with it, since it has a greater RSSI from the client.

D. The client selects the AP based on a known set of MAC to BSSID mappings stored in the clients authorized SSID listing.

A. 320 W

B. 180 W

C. 240 W

D. 60 W

A. MCS data rates

B. Maximal Ratio Combining

C. Channel bonding

D. Mandatory data rates