최신 JN0-330 무료덤프 - Juniper JN0-330-Enhanced Services, Specialist(JNCIS-ES)

A. from a zone to a different zone

B. from a zone to the router itself

C. from one interface to another interface

D. from a zone to the same zone

A. Source NAT with static source pool translates both the source IP address and the source port of a packet.

B. Source NAT with static source pool defines a one-to-one mapping from an original source IP address to a translated source IP address.

C. Source NAT with static source pool can translate multiple source IP addresses to the same translated IP address.

D. Source NAT with static source pool allows inbound connections to be initiated to the static source pool IP addresses.

A. VPN establishment

B. stateful packet processing

C. packet-based forwarding

D. network address translation

A. The existing FTP and BGP sessions will be re-evaluated and all sessions will be dropped.

B. The existing FTP and BGP sessions will be re-evaluated and only FTP sessions will be dropped.

C. The existing FTP sessions will continue and only the existing BGP sessions will be dropped.

D. The existing FTP and BGP sessions will continue.

A. [edit routing-instances]
user@host# show
foo {
interface ge-0/0/3.0;
interface ge-0/0/2.102;
}
bar {
interface ge-0/0/0.0;
interface ge-0/0/3.0;
}

B. [edit security zones]
user@host# show
security-zone foo {
interfaces {
ge-0/0/1.0;
ge-0/0/2.0;
}
security-zone bar {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}

C. [edit routing-instances]
user@host# show
foo {
interface ge-0/0/3.0;
interface ge-0/0/3.102;
}
bar {
interface ge-0/0/0.0;
interface ge-0/0/2.0;
}

D. [edit security zones]
user@host# show
security-zone foo {
interfaces {
ge-0/0/1.0;
ge-0/0/3.0;
}
security-zone bar {
interfaces {
ge-0/0/2.0;
ge-0/0/3.102;
}

A. Create an address book entry in the Trust zone for the 172.19.1.1/32 prefix and reference this entry in the policy.

B. Specify the IP address (172.19.1.1/32) as the destination address in the policy.

C. Specify the DNS entry (hostb.example.com.) as the destination address in the policy.

D. Create an address book entry in the Untrust zone for the 172.19.1.1/32 prefix and reference this entry in the policy.

A. The configuration specifies that the bundle(s) will be up if there are at least three configured member links and at least three are active.

B. The configuration defines a single MLPPP bundle.

C. The configuration specifies that the bundle(s) will be up if there are at least three configured member links and at least one is active .

D. The configuration defines two MLPPP bundles.

A. when you want to configure a tunnel policy with an action of deny

B. when you want to conserve tunnel resources

C. when a dynamic routing protocol such as OSPF must be sent across the VPN

D. when the remote peer is a dialup or remote access client

A. Perfect Forward Secrecy

B. security proposal

C. IKE gateway

D. mode

A. OSPF not-so-stubby areas do not have any Type 5 LSAs, while the backbone area contains Type 7 LSAs.

B. The OSPF backbone area contains Type 5 LSAs, while not-so-stubby areas contain Type 7 LSAs.

C. OSPF stub areas do not have any Type 5 LSAs, while totally stubby areas do not have any Type 5, 3, and 4 LSAs.

D. The OSPF backbone area contains all routes, while other OSPF areas contain only summary routes.