최신 MS-203 무료덤프 - Microsoft 365 Messaging
You have a Microsoft Exchange Online tenant.
You plan to create a mail flow rule that will forward email messages containing specific words to a user's manager for approval.
You need to test the rule. The solution must meet the following requirements:
* Prevent users from being notified that their message was forwarded to their manager.
* Support the tracking of messages that match the rule by using message tracing.
Which two settings should you modify? To answer, select the settings in the answer are a. NOTE: Each correct selection is worth one point.

You plan to create a mail flow rule that will forward email messages containing specific words to a user's manager for approval.
You need to test the rule. The solution must meet the following requirements:
* Prevent users from being notified that their message was forwarded to their manager.
* Support the tracking of messages that match the rule by using message tracing.
Which two settings should you modify? To answer, select the settings in the answer are a. NOTE: Each correct selection is worth one point.

정답:

You need to configure the environment to support the planned changes for email addresses.
How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

정답:

Reference:
https://docs.microsoft.com/en-us/powershell/module/exchange/email-addresses-and-address-books/new-emailaddresspolicy?view=exchange-ps
https://docs.microsoft.com/en-us/Exchange/email-addresses-and-address-books/email-address-policies/email-address-policies?view=exchserver-2019
Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to create a public folder named Finance in your Microsoft 365 tenant. Users must be able to send emails to Finance by using an email address of [email protected](1).TenantName.
To complete this task, sign in to the Exchange admin center.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to create a public folder named Finance in your Microsoft 365 tenant. Users must be able to send emails to Finance by using an email address of [email protected](1).TenantName.
To complete this task, sign in to the Exchange admin center.
정답:
See explanation below
Explanation:
Use the EAC to create a public folder mailbox
In the EAC, go to Public folders > Public folder mailboxes, and then click Add +.
In the New public folder mailbox page that opens, enter the following information:
- Name: Enter the name for the public folder mailbox.
- Organizational unit: Click Browse to select the location in Active Directory where the mailbox object is created.
- Mailbox database: Click Browse to select the mailbox database where the mailbox is created.
When you're finished, click Save.
Use the EAC to create a public folder
When using the EAC to create a public folder, you'll only be able to set the name and the path of the public folder. To configure additional settings, you'll need to edit the public folder after it's created.
Navigate to Public folders > Public folders.
If you want to create this public folder as a child of an existing public folder, click the existing public folder in the list view. If you want to create a top-level public folder, skip this step.
Click Add +.
In Public Folder, type the name of the public folder.
In the Path box, verify the path to the public folder. If this isn't the desired path, click Cancel and follow Step 2 of this procedure.
Click Save.
Navigate back to Public folders > Public folders.
In the list view, select the public folder that you want to mail-enable or mail-disable.
In the details pane, under Mail settings, click Enable or Disable.
A warning box displays asking if you're sure you want to enable or disable email for the public folder. Click Yes to continue.
Reference:
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/create-public-folder-mailboxes?view=exchserver-2019
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/create-public-folders?view=exchserver-2019
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/mail-enable-or-disable?view=exchserver-2019
Explanation:
Use the EAC to create a public folder mailbox
In the EAC, go to Public folders > Public folder mailboxes, and then click Add +.
In the New public folder mailbox page that opens, enter the following information:
- Name: Enter the name for the public folder mailbox.
- Organizational unit: Click Browse to select the location in Active Directory where the mailbox object is created.
- Mailbox database: Click Browse to select the mailbox database where the mailbox is created.
When you're finished, click Save.
Use the EAC to create a public folder
When using the EAC to create a public folder, you'll only be able to set the name and the path of the public folder. To configure additional settings, you'll need to edit the public folder after it's created.
Navigate to Public folders > Public folders.
If you want to create this public folder as a child of an existing public folder, click the existing public folder in the list view. If you want to create a top-level public folder, skip this step.
Click Add +.
In Public Folder, type the name of the public folder.
In the Path box, verify the path to the public folder. If this isn't the desired path, click Cancel and follow Step 2 of this procedure.
Click Save.
Navigate back to Public folders > Public folders.
In the list view, select the public folder that you want to mail-enable or mail-disable.
In the details pane, under Mail settings, click Enable or Disable.
A warning box displays asking if you're sure you want to enable or disable email for the public folder. Click Yes to continue.
Reference:
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/create-public-folder-mailboxes?view=exchserver-2019
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/create-public-folders?view=exchserver-2019
https://docs.microsoft.com/en-us/exchange/collaboration/public-folders/mail-enable-or-disable?view=exchserver-2019
You have a Microsoft Exchange Online tenant named contoso.com that contains a resource mailbox named Room1. You need to configure Room1 to send the following automatic response message: "Thanks for the meeting invite." How should you complete the command? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

NOTE: Each correct selection is worth one point.

정답:

Your network contains an Active Directory Domain Services {AD DS) domain.
You have a Microsoft 365 subscription. All mailboxes are hosted in Microsoft Exchange Online.
You have the DNS domains shown in the following table.

You need to ensure that the Autodiscover service can be used to configure Microsoft Outlook settings for devices connecting from the internet. How should you configure the DNS record for Autodiscover? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

You have a Microsoft 365 subscription. All mailboxes are hosted in Microsoft Exchange Online.
You have the DNS domains shown in the following table.

You need to ensure that the Autodiscover service can be used to configure Microsoft Outlook settings for devices connecting from the internet. How should you configure the DNS record for Autodiscover? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

정답:

Please wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to ensure that when emails containing an attachment that uses an .ace extension is sent to your company, the email is blocked. Each time an email is blocked, a notification must be sent to [email protected].
To complete this task, sign in to the Exchange admin center.
When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.
Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.
Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.
Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.

Use the following login credentials as needed:
To enter your username, place your cursor in the Sign in box and click on the username below.
To enter your password, place your cursor in the Enter password box and click on the password below.
Microsoft 365 Username: [email protected]
Microsoft 365 Password: xxxxxx
If the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.
The following information is for technical support purposes only.
Lab Instance: XXXXXX
You need to ensure that when emails containing an attachment that uses an .ace extension is sent to your company, the email is blocked. Each time an email is blocked, a notification must be sent to [email protected].
To complete this task, sign in to the Exchange admin center.
정답:
See explanation below
Explanation:
In the EAC, in the left navigation pane, select mail flow, and then select rules.
Select New (+), and then select Create a new rule.
In the New Rule window, select More options.
In the Name box, specify a name for the new rule.
Select the *Apply this rule if drop-down list, point to Any attachment, and then select File extension includes these words.
In the Specify words or phrases window, type the file name extension of any attachment that you want to block, and then select the plus symbol (+) to add the file name extension to the list. When the list is completed, select OK.
Select the Do the following drop-down list, point to Block the message, and then select Reject the message and include an explanation or select Delete the message without notifying anyone.
If it's required, add a statement to inform users who will receive the non-delivery report (NDR) of the reason that mail delivery failed, and then select OK.
Specify any additional options such as rule auditing and rule activation or deactivation time, and then select Save.
Reference:
https://docs.microsoft.com/en-us/exchange/troubleshoot/email-delivery/how-to-block-message-from-being-sent-or-received
Explanation:
In the EAC, in the left navigation pane, select mail flow, and then select rules.
Select New (+), and then select Create a new rule.
In the New Rule window, select More options.
In the Name box, specify a name for the new rule.
Select the *Apply this rule if drop-down list, point to Any attachment, and then select File extension includes these words.
In the Specify words or phrases window, type the file name extension of any attachment that you want to block, and then select the plus symbol (+) to add the file name extension to the list. When the list is completed, select OK.
Select the Do the following drop-down list, point to Block the message, and then select Reject the message and include an explanation or select Delete the message without notifying anyone.
If it's required, add a statement to inform users who will receive the non-delivery report (NDR) of the reason that mail delivery failed, and then select OK.
Specify any additional options such as rule auditing and rule activation or deactivation time, and then select Save.
Reference:
https://docs.microsoft.com/en-us/exchange/troubleshoot/email-delivery/how-to-block-message-from-being-sent-or-received
You have a Microsoft Exchange Online tenant.
You plan to implement an on-premises alarm system that will send email alerts by using SMTP. The alarm system will NOT support TLS.
You need to ensure that the alarm system can send the alerts to both internal and external recipients by using Exchange Online.
'Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct answer is worth one point.
You plan to implement an on-premises alarm system that will send email alerts by using SMTP. The alarm system will NOT support TLS.
You need to ensure that the alarm system can send the alerts to both internal and external recipients by using Exchange Online.
'Which two actions should you perform? Each correct answer presents part of the solution.
NOTE: Each correct answer is worth one point.
정답: B,E
설명: (DumpTOP 회원만 볼 수 있음)
You have a Microsoft Exchange Online tenant that contains a user named User1.
You need to ensure that User1 can perform the following tasks from the Microsoft Purview compliance portal:
* Create, edit, delete, and control access to Core eDiscovery cases.
* Use Content search to bulk delete email messages.
The solution must follow the principle of least privilege. To which role group should you add User1?
You need to ensure that User1 can perform the following tasks from the Microsoft Purview compliance portal:
* Create, edit, delete, and control access to Core eDiscovery cases.
* Use Content search to bulk delete email messages.
The solution must follow the principle of least privilege. To which role group should you add User1?
정답: A
You have a hybrid deployment that contains a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 server named Server1. All users use an email address suffix of @contoso.com.
You migrate 200 mailboxes from Server1 to Exchange Online by using Exchange PowerShell cmdlets. Users hosted on Server1 can send email messages to the migrated mailboxes.
In Microsoft 365, you create a new mailbox that uses an email address of [email protected].
When email is sent from the mailboxes hosted on Server1 to [email protected], the senders receive a non-delivery report (NDR) that contains the following text:
"550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup." You verify that Microsoft 365 mailboxes can send email to [email protected] successfully.
You delete the user account and mailbox of User1.
You need to ensure that when new mailboxes are created, all the users at your company can exchange email successfully Which two actions should you perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
You migrate 200 mailboxes from Server1 to Exchange Online by using Exchange PowerShell cmdlets. Users hosted on Server1 can send email messages to the migrated mailboxes.
In Microsoft 365, you create a new mailbox that uses an email address of [email protected].
When email is sent from the mailboxes hosted on Server1 to [email protected], the senders receive a non-delivery report (NDR) that contains the following text:
"550 5.1.10 RESOLVER.ADR.RecipientNotFound; Recipient not found by SMTP address lookup." You verify that Microsoft 365 mailboxes can send email to [email protected] successfully.
You delete the user account and mailbox of User1.
You need to ensure that when new mailboxes are created, all the users at your company can exchange email successfully Which two actions should you perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
정답: C,D
설명: (DumpTOP 회원만 볼 수 있음)
You have a Microsoft 365 subscription for a company named Fabrikam,Inc. The company uses an Exchange Online tenant that has an email domain named fabirkam.com.
Fabrikam works with a partner company Contoso, Ltd. that uses an email domain named contoso.com.
A new security policy at Contoso states that any email sent from partners to Contoso employees must use TLS encryption.
You need to ensure that email sent from Fabrikam to Contoso uses TLS.
What should you create in the tenant?
Fabrikam works with a partner company Contoso, Ltd. that uses an email domain named contoso.com.
A new security policy at Contoso states that any email sent from partners to Contoso employees must use TLS encryption.
You need to ensure that email sent from Fabrikam to Contoso uses TLS.
What should you create in the tenant?
정답: C
설명: (DumpTOP 회원만 볼 수 있음)
Use the drop-down menus to select the answer choice that complete each statement based on the information presented in the Exchange Online Connector exhibit.
NOTE: Each correct selection is worth one point.

NOTE: Each correct selection is worth one point.

정답:

You need to implement a solution to support the planned changes for the branch office administrators.
What should you do?
What should you do?
정답: A
You have a Microsoft Exchange Online tenant.
Users use Microsoft Outlook as their primary email client.
The users report that email messages received from a partner company are often delayed before being delivered.
You need to analyze the message header of one of the delayed messages to identify the cause of the delay.
What are two actions that you can perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
Users use Microsoft Outlook as their primary email client.
The users report that email messages received from a partner company are often delayed before being delivered.
You need to analyze the message header of one of the delayed messages to identify the cause of the delay.
What are two actions that you can perform? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
정답: C,D
Your network contains an on-premises Active Directory Forest. The forest contains the domains shown in the following table.

You have a Microsoft 365 subscription.
You plan to migrate only the mailboxes of contoso.com to Exchange Online.
You deploy an Exchange Online tenant that supports the contoso.com domain.
All incoming internet email and all email between Exchange Online and the Exchange Server are routed through server1.contoso.com.
After you migrate the first test mailboxes, you discover that the users in contoso.com that have mailboxes in Exchange Online cannot see any fabrikam.com recipients in the global address list (GAL).
You need to ensure that the contoso.com users can see the fabrikam.com recipients in the GAL What should you do?

You have a Microsoft 365 subscription.
You plan to migrate only the mailboxes of contoso.com to Exchange Online.
You deploy an Exchange Online tenant that supports the contoso.com domain.
All incoming internet email and all email between Exchange Online and the Exchange Server are routed through server1.contoso.com.
After you migrate the first test mailboxes, you discover that the users in contoso.com that have mailboxes in Exchange Online cannot see any fabrikam.com recipients in the global address list (GAL).
You need to ensure that the contoso.com users can see the fabrikam.com recipients in the GAL What should you do?
정답: A
You have a Microsoft Exchange Online tenant.
You need to import PST files from a legacy archiving solution to Exchange Online. You will import the PST files over the internet.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

You need to import PST files from a legacy archiving solution to Exchange Online. You will import the PST files over the internet.
Which five actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

정답:

Reference:
https://docs.microsoft.com/en-us/microsoft-365/compliance/use-network-upload-to-import-pst-files?view=o365-worldwide
You have a hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 organization. The deployment contains an Exchange Server 2019 server named Server1.
Server1 has a public certificate named Cert1 that is bound to the SMTP protocol. Cert1 will expire soon.
you replace Cert1 with a new certificate named Cert2 from a different public certification authority (CA) After you replace the certificate, you discover that email delivery between Server1 and the Exchange Online tenant fails.
You need to ensure that messages can be delivered successfully
What should you do on Server1?
Server1 has a public certificate named Cert1 that is bound to the SMTP protocol. Cert1 will expire soon.
you replace Cert1 with a new certificate named Cert2 from a different public certification authority (CA) After you replace the certificate, you discover that email delivery between Server1 and the Exchange Online tenant fails.
You need to ensure that messages can be delivered successfully
What should you do on Server1?
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
You need to recommend a solution for the public folders that supports the planned changes and meets the technical requirements.
What should you recommend?
What should you recommend?
정답: B
설명: (DumpTOP 회원만 볼 수 있음)
You have a Microsoft Exchange Online tenant.
The tenant has the following Exchange ActiveSync configurations.

Which mail client can Android device users use?
The tenant has the following Exchange ActiveSync configurations.

Which mail client can Android device users use?
정답: C
설명: (DumpTOP 회원만 볼 수 있음)