최신 NSE7_NST-7.2 무료덤프 - Fortinet NSE 7 - Network Security 7.2 Support Engineer

A. Ensure the port for Neighbor Discovery has been changed.

B. Ensure TCP port 8013 is not blocked along the way

C. FortiGate must not be in NAT mode.

D. You must enable Security Fabric/Fortitelemetry on the receiving interface of the upstream FortiGate.

E. You must authorize the downstream FortiGate on the root FortiGate.

A. Its value represents the time it takes to receive a response after a rating request is sent to a particular server.

B. Its value is incremented with each packet lost.

C. lts initial value is statically set to 10.

D. It determines which FortiGuard server is used for license validation.

A. The local router initiated the BGP session to 10.200.3.1 but did not receive a response.

B. The local router has a different AS number than the remote peer.

C. The local router is receiving BGP keepalives from the remote peer, but the local peer has not received the OpenConf inn yet.

D. The router 10.200.3.1 has authentication configured for BGP and the local router does not.

A. You can configure automation stitches on any FortiGate device in a Security Fabric environment.

B. You can create automation stitches to run diagnostic commands and attach the results to an email message when CPU or memory usage exceeds specified thresholds.

C. You can set an automation stitch configured to execute actions in parallel to insert a specific delay between actions.

D. An automation stitch configured to execute actions sequentially can take parameters from previous actions as input for the current action.