최신 PW0-270 무료덤프 - CWAP Certified Wireless Analysis Professional

A. 1 and 2

B. 1 and 3

C. 3 and 4

D. 1, 3, and 4

E. All of the plots

A. The Receiver address and the BSSID are always the same.

B. All Beacons generated by APs contain a TIM information element.

C. The BSSID and Source Address are always the same.

D. Beacons can be disabled for security purposes.

E. The Beacon interval must be the same for all WLANs (SSIDs) supported by a single AP

F. When the SSID is "hidden," the ESS subfield of the Capability Information field distinguishes one BSS from another.

G. The Destination Address is always FF:FF:FF:FF:FF:FF.

A. The access point has both 1 Mbps and 2 Mbps configured as basic rates.

B. ERP mobile stations must use the RTS/CTS protocol before Data transmissions.

C. The access point is operating on channel 3.

D. The SSID value in this Beacon is null.

E. This Beacon frame came from an ERP or HT access point.

A. Channel Switch Announcement frames use the Action frame body format.

B. Channel Switch Announcement frames are the only place where the Channel Switch Announcement element is found.

C. Channel Switch Announcement frames are transmitted and retransmitted on a channel until all associated STAs successfully move to the new channel.

D. Channel Switch Announcement elements may be carried in Beacon management frames.

E. In an infrastructure BSS, Channel Switch Announcement frames may be transmitted by either the AP or an associated STA.

A. Data Control field

B. Protocol Order field

C. QoS Control field

D. MAC Service Data Unit field

E. Sequence Control field

F. Frame Control field

A. Non-HT Duplicate

B. HT-mixed format

C. HT-greenfield format

D. Phased Coexistence PPDU

E. Dual-CTS